Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning it could be due to an inoperative battery for the coin-cell or damaged receiver modules, water issues, or even a defective chip. These are all easy solutions and you'll be able to get your car back to speed in no time!
The key blade could become worn out and lead to an unusable car key. It is easy to fix this problem by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.
Battery
The key fob battery in your Peugeot 308 can sometimes die or become weak enough to send an energizing signal to the car. This can cause the key fob to stop functioning, preventing you from locking and opening the doors, or even starting your engine. To fix this issue, you'll have to replace the battery inside your key fob.
You can purchase a new battery at an auto parts store or at your local hardware store. Make sure the battery is brand new and has not sitting on the shelf too long. A new battery has more capacity and will send a stronger signal your vehicle.
After replacing the battery After replacing the battery, try locking and unlocking the doors of your Peugeot with the key fob. If the doors do not unlock it's likely that the issue lies with the car's receiver module which can be programmed by your local Peugeot dealer.
It's also possible that the chip inside your key fob is damaged. It is possible to cause damage to your key fob when you drop it on the ground or expose it to water. The rubber seals that protect your chip from moisture could be worn out over time. This is especially true when you expose your key fob to water over long periods of time, like submerging it in the ocean or in the ocean. To avoid this from happening, it's essential to protect your key fob from moisture and to never let it come into contact with water.
Water Damage
Don't let go of your key fob if it gets wet, no matter if you dropped it in the pool or stumbled into a water puddle. The key fob is protected by rubber seals, however, prolonged exposure to water may affect the electronic chip. Since water is an excellent conductor so any water that gets inside the key fob will create a series of short circuits, which could eventually ruin the chip. After removing the batteries, clean the contacts using isopropyl and dry them completely before putting them back in.
peugeot 1007 key fob programming may not start because of the battery being dead. If you have an extra car, jumper cables could be used to get the engine running again. If the battery is defective the battery must be replaced.
Another reason could be a bad receiver in the vehicle, which could prevent it from receiving a signal from the key fob. It could be due to a issue with the antenna, or wiring or the key fob might be damaged. If you are using a new key fob it may require to be programmed into the vehicle. If you are unable solve the issue yourself, contact a professional technician. A technician trained in the field will be able diagnose the problem quickly, and then fix it right away.
Radio Interference
Signs like keys not being recognized or having a narrow range often mean that there is an interference in the system. The interference could be transmitted or radiated the latter caused by power cables and speaker cables being too close to electrical components. In general, rerouting cables or moving them away from these components will solve the problem.
It's unlikely someone is watching your key fob's signals in attempt to steal your vehicle however it is possible that radio interference has slowed the signal. Luckily, this is a simple issue to fix.
If your key fob is not being recognized by the system, you can try a new battery. Also, ensure that the battery you are using is the right type and size. Incorrectly sized batteries can damage the fob.
These devices can interfere with the key signal if they operate on the same radio frequency. It is best to avoid having these devices attached to your key fob.
Pairing Issues
A car's remote keyless entry system has a receiver that receives radio frequency signals from the key fob. You will not be able start your vehicle if the receiver isn't working even if your key fob is in good working order and can be reprogrammed. This issue can be caused in a number of ways, such as a dead coin-cell battery or water damage. The receiver could also be faulty due to a software error or internal damage to the key.
The battery inside your Peugeot 308 keyfob is likely to have gone out of service. It is possible to replace it by a new battery but it is important to select the correct battery for your key fob. The wrong battery could lead to further problems with the key fob, therefore it is recommended to use either the original or a replacement that is identical in size, voltage, and specifications.
Your Peugeot 308 keyfob may not function if linked to an unrelated vehicle. This could happen if you have given your key fob to a friend or if the key has been used to unlock and start other vehicles. You can fix this by reprogramming your key fob with an OBDII scanner. This scanner will typically ask you for specific details about your vehicle, for example the VIN or engine type, and it's important to enter this correctly.